Always plug the machine directly into a grounded wall outlet. Avoid using extension cords, as they can cause voltage drops that damage the motor or control board.

Communication failure. Check the wire connection between the console and the motor controller.

If your console displays an error, refer to these common codes:

Press the "Start" button to begin in manual mode. The belt or resistance will start at the lowest setting.

Ensure the magnetic safety key is properly seated on the console. 5. Where to Download the PDF

Sweat is corrosive. Wipe down the console and frame after every workout with a damp cloth and mild soap. Avoid spraying water directly on the electronics. 4. Troubleshooting Common Error Codes

Overcurrent protection. Usually caused by high friction; the belt likely needs lubrication.

The ZY-8068 typically features a multi-window LCD or LED display.