on the stairs to check the length. If the rail is too long, it can be cut from the bottom end using a circular saw with a metal-cutting blade.
Immediately bolt the mechanical end stops at both ends of the rail to prevent the lift from over-traveling. Step D: Install the Seat Place the seat assembly onto the drive unit’s post. thyssenkrupp levant stair lift installation manual full
Allow the unit to charge for at least 4–6 hours before the first full-weight test. on the stairs to check the length
Run the lift up and down using the armrest toggle without a passenger. Listen for any clicking or resistance. Step D: Install the Seat Place the seat
Screw the brackets into the stair treads. For wood stairs, use the provided wood screws; for concrete, use masonry anchors. Step C: Mounting the Drive Unit
Use a spirit level to ensure the rail is consistent.