If you share these details, I can find the exact hex addresses or scatter files you need.
Disconnect your phone and power it on. You may see a "Red State" or "Orange State" warning during the splash screen; this is a normal indication that the bootloader is unlocked.
With the addresses entered, click the "Start" button in SP Flash Tool. Reconnect your device (ensure the Auth Bypass is still active). The process takes only a few seconds. A green checkmark or a "Format OK" window will appear, indicating the configuration partition has been modified to an unlocked state. Step 5: Verify the Bootloader Status sp flash tool unlock bootloader
SP Flash Tool is a powerful utility designed for MediaTek (MTK) devices, allowing users to flash firmware, recovery images, and perform low-level maintenance. While traditionally used for unbricking or updating software, it is also a vital instrument for unlocking the bootloader on specific MTK-based smartphones and tablets.
Unlocking a bootloader is a high-level procedure that carries risks. Ensure you have the following ready: A Windows PC and a high-quality USB cable. MediaTek USB VCOM drivers installed on your computer. The specific Scatter file for your device model. If you share these details, I can find
Navigate to the "Format" tab and select "Manual Format Flash." You will need to input specific hex addresses for the unlock partition. These addresses vary by device. You can find them by opening your scatter file in a text editor and searching for the "partition_name: seccfg" or "unlock" section. Copy the linear_start_addr and the partition_size into the corresponding fields in SP Flash Tool. Step 4: Execute the Unlock
Unlocking your bootloader typically voids your warranty and lowers the device's security profile. Only proceed if you intend to modify the system software and understand the technical implications of running an unlocked device. To provide more specific instructions for your device: What is your and chipset ? Do you have the official firmware downloaded? Are you stuck on a specific error code ? With the addresses entered, click the "Start" button
Open flash_tool.exe from your extracted folder. In the "Download" tab, click on "Choose" next to the Scatter-loading File and select the scatter text file from your device's firmware folder.