The error on a Ricoh device is a Service Call (SC) code specifically indicating a Fusing Pressure Release Motor Error . This fault occurs when the machine fails to detect the Home Position (HP) of the pressure roller release mechanism after three consecutive attempts. Common Causes of SC569-00

The pressure roller HP sensor (often designated as S26 or SEN60) may be disconnected, dirty, or defective.

Worn fuser films, damaged pressure rollers, or seized bearings can increase the physical load on the motor, causing it to stall.

The pressure release motor may be locked due to an excessive load, or the motor driver itself could be defective.

Damaged harnesses or loose connectors between the motor/sensor and the control board. How to Fix and Reset SC569-00