Blade Sharpening: A dull blade strains the hydraulic system and produces jagged edges. Change or sharpen the knife regularly.
Safety Sensors: Regularly test the infrared light barriers to ensure they stop the machine immediately if the beam is broken. Safety Protocols Manual-adast-maxima-mh-80-2
The Cut Cycle: Standard operation requires two-hand safety activation. Both buttons must be pressed simultaneously to engage the knife. Maintenance and Care Blade Sharpening: A dull blade strains the hydraulic
Knife Fails to Return: This may indicate a hydraulic pressure drop or a faulty limit switch. Check the hydraulic pressure gauge and inspect the switches at the top of the knife stroke. Safety Protocols The Cut Cycle: Standard operation requires
Hydraulic Fluid: Check the hydraulic oil levels before the first start. Use only the manufacturer-recommended hydraulic fluid to prevent seal degradation. Operating Instructions
Oil Filter: Replace the hydraulic oil filter annually or after every 2,000 hours of operation.
Lubrication: Grease all moving parts, especially the backgauge screw and the knife guides, according to the intervals specified in the manual.