Kolbus Da 36 Manual ((new)) 〈TOP × 2026〉

Double arm action with twin-hopper cut-board feeder Machine Configuration and Feeding Mechanisms

The glue may be too thin, cold, or the pressing roller tension is insufficient. Adjust the pre-melter temperature or tighten the forming station rollers.

Automatically draws the left and right panels of the hard cover. Kolbus Da 36 Manual

Inspect the vacuum pump filters and replace them if clogged.

The Kolbus DA 36 was built for medium to high-volume production of hard book covers, rigid box components, and files. Below are the standard mechanical parameters for the machine: 405 x 560 mm Minimum Opened Case Size: 110 x 155 mm Spine Insert Width: 8 mm to 80 mm Maximum Speed: Up to 36 cycles per minute Double arm action with twin-hopper cut-board feeder Machine

Check for uneven picker arm suction or misaligned board hoppers.

Features dual capabilities to process either rigid/stiff cardboard or soft, flexible reels. 2. Cloth & Cover Feeder Inspect the vacuum pump filters and replace them if clogged

Bring the glue to the manufacturer’s recommended temperature (typically 130°C to 150°C for animal glues).