K9604w Firmware — [2021]

"No Upgrade File Found"This usually means the USB drive is not formatted to FAT32 or the file is hidden inside a folder. Re-check the root directory.

The Update ProcessPlug the USB into the port on the back of the NVR. Go to System Admin > System Upgrade. Select "Local Upgrade." The system will detect the file and begin the process. k9604w firmware

Note down the Hardware Version (e.g., K9604-W) and the current Build Date. Step-by-Step Installation Guide "No Upgrade File Found"This usually means the USB

Most K9604-W systems do not support "Over-the-Air" (OTA) updates and must be updated manually via USB. Go to System Admin > System Upgrade

Cameras Not MatchingIf your cameras disconnect after the update, you may need to "Match Code" again. Use an Ethernet cable to plug the camera directly into the NVR, select Video Management, and click Match Code to re-pair the wireless signal. Where to Find the Correct File