You can customize parameters such as holding temperature ( ), temperature increase rate ( ), and holding time ( ) via the menu buttons. 3. Temperature Calibration (Silver Test)

Periodic calibration is essential as physical impacts and residue can cause slight shifts in temperature accuracy. Programat®

Place the unit on a flat, level surface away from heaters or other heat sources. Ensure at least 110 mm of space behind the furnace for the swivel movement of the furnace head and adequate air circulation. Connections:

Connect the pump to the dedicated socket at the rear. It is highly recommended to use an original Ivoclar Vivadent vacuum pump to ensure compatibility with the furnace’s power consumption limits.

Secure the heater plug by rotating it 45° until it snaps into place, and ensure the thermocouple plug is inserted with correct polarity. 2. Operating Procedures

Turn on the power switch at the rear. The furnace performs a self-test before displaying the standby screen. Program Selection: Enter the desired Program Number ( ) using the keypad. Press START (

or 62) to begin the firing cycle once the furnace reaches the standby temperature (