Hyt Tc-320 Programming Software [portable] May 2026

If your computer doesn't automatically recognize the cable, you’ll need to install the Prolific or FTDI drivers (depending on your cable’s chipset). Step-by-Step Programming Guide 1. Setup and Connection Install the HYT TC-320 software on your Windows PC.

Here you can enter the RX (Receive) and TX (Transmit) frequencies. hyt tc-320 programming software

The TC-320 is unique because it uses a Mini-USB port for both charging and programming. However, not every Mini-USB cable works. You typically need a cable with a built-in USB-to-Serial converter (UART) specifically designed for HYT radios to ensure the PC recognizes the device. If your computer doesn't automatically recognize the cable,

Ensure the radio is turned ON . Also, check that the cable is pushed firmly into the Mini-USB port; some protective cases or dust covers can prevent a flush connection. Here you can enter the RX (Receive) and

While the TC-320 is "plug-and-play" out of the box with 16 pre-set channels, using the dedicated allows you to:

Program the side keys for functions like "Monitor" or "Scan."

A progress bar will appear. Do not unplug the cable or turn off the radio during this process, as it could "brick" the device. Once finished, the radio will usually restart or beep. Common Troubleshooting