H-ig41-uatx Rev 1.1 Manual [ TOP-RATED | 2027 ]

The H-IG41-uATX Rev 1.1 supports a variety of 65nm and 45nm Intel processors. Note that the maximum Thermal Design Power (TDP) for this board is typically 65W or 95W depending on the specific BIOS version.

Move the jumper cap from pins 1-2 (Normal) to pins 2-3 (Clear). Wait 15 seconds. Return the jumper to pins 1-2. Plug in and restart. Rear I/O Port Layout The back panel of the H-IG41-uATX typically includes:

Note: This board is often picky with "high-density" RAM. For best results, use "low-density" modules (chips on both sides of the stick). Internal Headers and Connectors h-ig41-uatx rev 1.1 manual

Maximum Capacity: 8GB (2 x 4GB modules)Speed: DDR3 800 / 1066 MHzArchitecture: Dual-channel support

The H-IG41-uATX (Revision 1.1) is a legacy motherboard commonly found in HP and Compaq Pavillion desktop systems, such as the Slimline series. Manufactured by Foxconn (often referred to by its codename, Eton), this board utilizes the Intel G41 Express chipset. Since official digital manuals for these OEM boards are often difficult to locate, this guide serves as a comprehensive technical reference for installation, jumper settings, and hardware compatibility. Technical Specifications The H-IG41-uATX Rev 1

Front Panel Audio (F_AUDIO)Supports High Definition Audio (HD) or AC'97 standards. By default, it is configured for HD Audio. Clearing CMOS (Password/BIOS Reset)

Chipset: Intel G41 Express / Intel ICH7Form Factor: Micro-ATX (uATX)CPU Socket: LGA 775 (Socket T)Front Side Bus (FSB) Support: 800 / 1066 / 1333 MHzMemory Slots: 2 x 240-pin DDR3 DIMMExpansion Slots: 1 x PCIe x16, 2 x PCIe x1, 1 x PCIStorage: 4 x SATA II (3.0 Gb/s) connectors Processor Support Wait 15 seconds

Intel Core 2 Quad (up to Q9xxx series)Intel Core 2 Duo (up to E8xxx series)Intel Pentium Dual-CoreIntel Celeron 400 series Memory Configuration

Get a Free Quote

The H-IG41-uATX Rev 1.1 supports a variety of 65nm and 45nm Intel processors. Note that the maximum Thermal Design Power (TDP) for this board is typically 65W or 95W depending on the specific BIOS version.

Move the jumper cap from pins 1-2 (Normal) to pins 2-3 (Clear). Wait 15 seconds. Return the jumper to pins 1-2. Plug in and restart. Rear I/O Port Layout The back panel of the H-IG41-uATX typically includes:

Note: This board is often picky with "high-density" RAM. For best results, use "low-density" modules (chips on both sides of the stick). Internal Headers and Connectors

Maximum Capacity: 8GB (2 x 4GB modules)Speed: DDR3 800 / 1066 MHzArchitecture: Dual-channel support

The H-IG41-uATX (Revision 1.1) is a legacy motherboard commonly found in HP and Compaq Pavillion desktop systems, such as the Slimline series. Manufactured by Foxconn (often referred to by its codename, Eton), this board utilizes the Intel G41 Express chipset. Since official digital manuals for these OEM boards are often difficult to locate, this guide serves as a comprehensive technical reference for installation, jumper settings, and hardware compatibility. Technical Specifications

Front Panel Audio (F_AUDIO)Supports High Definition Audio (HD) or AC'97 standards. By default, it is configured for HD Audio. Clearing CMOS (Password/BIOS Reset)

Chipset: Intel G41 Express / Intel ICH7Form Factor: Micro-ATX (uATX)CPU Socket: LGA 775 (Socket T)Front Side Bus (FSB) Support: 800 / 1066 / 1333 MHzMemory Slots: 2 x 240-pin DDR3 DIMMExpansion Slots: 1 x PCIe x16, 2 x PCIe x1, 1 x PCIStorage: 4 x SATA II (3.0 Gb/s) connectors Processor Support

Intel Core 2 Quad (up to Q9xxx series)Intel Core 2 Duo (up to E8xxx series)Intel Pentium Dual-CoreIntel Celeron 400 series Memory Configuration