If you have lost access to the iRMC and the default credentials do not work, you can reset the password through several methods:
If you have access to the host operating system (Linux or Windows) and the IPMI drivers are loaded, you can reset the password without taking the server offline. ipmitool user set password 2 'YourNewPassword' Use code with caution. Note: User ID 2 is almost always the default admin account. fujitsu irmc default password
The default password for a Fujitsu Integrated Remote Management Controller (iRMC) varies by hardware generation, with newer models shifting from generic credentials to unique, server-specific passwords for enhanced security. iRMC Generation Default Username Default Password iRMC S2, S3, S4, S5 admin admin iRMC S6 admin Unique per server (found on System ID card) Understanding iRMC S6 Security Changes If you have lost access to the iRMC
If you perform a factory reset via the UEFI BIOS, the credentials will revert to this unique printed password, not a generic one. Password Requirements for iRMC S6 The default password for a Fujitsu Integrated Remote
Use the Fujitsu IPMIView tool to execute similar commands. 2. Using UEFI BIOS (Reboot Required) Reboot the server and enter the BIOS Setup Utility . Navigate to the Server Management or iRMC section. Look for an option titled "Load iRMC Default Values" .
On some motherboards (such as the TX1330 series), there is a physical . Consult the Fujitsu Upgrade and Maintenance Manual for your specific model to locate the pins (usually found near the SATA ports).
Setting this to "Yes" and saving will revert the iRMC to its factory state (Warning: This wipes all custom iRMC configurations).