Some Foxconn boards made for HP or Dell use a 13-pin or 14-pin layout. If your header is larger than 9 pins, you likely have an OEM-specific board that requires a different map. Safety Tips
Look for tiny text printed directly on the motherboard next to the pins (e.g., "PW," "RES," "HD"). foxconn n15235 motherboard front panel connectors updated
Connect to Pins 2 and 4 . Pin 2 is typically the positive (+) lead. Troubleshooting Common Issues Some Foxconn boards made for HP or Dell
Ensure the Power SW is on the correct pins. You can test the motherboard by gently touching Pins 6 and 8 with a screwdriver tip; if it starts, your wiring was the issue. Connect to Pins 2 and 4
Connect to Pins 1 and 3 . Ensure the positive wire (usually red or green) is on Pin 1. If the light doesn't blink during use, flip the connector around.
On almost all Foxconn boards, the front panel header is labeled , FP1 , or PANEL1 . It is usually located on the bottom-right corner of the motherboard.