Commax Dpra01 Installation Manual Link ~upd~ May 2026

The DP-RA01 typically uses a connection. Cable Type: TIV 0.65mm or higher. Distance: Up to 100 meters (330 feet) using 0.65mm wire.

Hang the DP-RA01 onto the bracket hooks and slide it down to lock it in place. ⚠️ Important Safety Precautions

Ensure the bracket is level to prevent the handset from hanging crookedly. commax dpra01 installation manual link

Connect these to the corresponding terminals on the outdoor unit (door camera) or the master room station.

The DP-RA01 usually triggers a dry contact on the master unit. Check the wiring between the master station and the electric strike. The DP-RA01 typically uses a connection

Verify if your specific DP-RA01 model requires direct AC power or if it is powered by the signal line. Connecting AC power to a DC-only terminal will destroy the unit.

Are you connecting this to a (like the DR-2K)? Is your unit battery-powered or plugged into a wall outlet ? Are you trying to link multiple room stations together? Hang the DP-RA01 onto the bracket hooks and

If you are looking for the official PDF documentation, check these common repositories: