Av4 Us Video Install Updated Site

: Secure the brackets to the back of your TV using a Phillips head screwdriver.

: Ensure the green/yellow wire is connected directly to the unit's chassis to prevent electrical interference or injury. Safety and Security Warning AV4 Installation | 4-Series® Control Systems Manual

In industrial settings, the Avtron Model AV4 is a magnetic sensor used to track motor speed and position. av4 us video install

: Use a stud finder to locate wood studs, level the included template, and drill pilot holes.

: For desktop use, attach the four adhesive rubber feet to the underside corners of the unit. : Secure the brackets to the back of

: Secure the lag bolts and washers. Hang the TV onto the top rail of the wall plate and push the bottom until it clicks into place.

: Use a #1 Phillips screwdriver to attach the included rack ears to the control system assembly. Mount it into a standard 19-inch equipment rack using four mounting screws. : Use a stud finder to locate wood

Use a #1 Phillips screwdriver to remove the six required screws from the control system assembly (shown in the illustration below) Installation Guide - BSS Audio