Audiosonic Caa-09169 Clock Radio - Manual Work

Press the MIN (Minute) button to reach the correct minutes.

Open the battery compartment on the bottom to install a backup battery (typically a 9V or CR2032, depending on the revision). This ensures your settings are saved during a power outage. Setting the Clock Time

The alarm indicator light should now be visible on the display, signifying the alarm is active. Kmarthttps://www.kmart.com.au BIG DISPLAY ALARM CLOCK USER MANUAL - Kmart Audiosonic Caa-09169 Clock Radio Manual WORK

Plug the AC power cord into a standard 230V wall outlet.

While the digits are flashing, press the HOUR button to advance the hours. Ensure you check the PM indicator (usually a small light on the side of the display) to set the correct half of the day. Press the MIN (Minute) button to reach the correct minutes

Press and hold the TIME SET (or CLOCK ) button for about 2 seconds until the display begins to flash.

Press the ALARM button again to toggle between "Buzz" (buzzer) or "Radio". Setting the Clock Time The alarm indicator light

Setting the time is usually done while the unit is in (radio turned off).